Akció!
FUTURELIGHT RDM Director Touch Screen – RDM vezérlõ, TFT érintõképernyõvel

FUTURELIGHT RDM Director Touch Screen – RDM vezérlõ, TFT érintõképernyõvel

361.290 Ft 222.990 Ft bruttó / db

Rendelhető

Cikkszám: 51834850 Kategóriák: ,
Powered by Google Translate
English English Magyar Magyar

RDM stands for “Remote Device Management” and makes remote control of devices connected to the DMX-bus possible. ANSI E1.20-2006 by ESTA specifies the RDM standard as an extension of the DMX512 protocol.Manual settings like adjusting the DMX starting address are no longer needed. This is especially useful when the device is installed in a remote area.RDM is integrated in the DMX-protocol without influencing the connections. The RDM-data is transmitted via the standard XLR-line – new DMX-cables are not necessary. RDM ready and conventional DMX devices can be operated in one DMX line. The RDM protocol sends own packages in the DMX512 data feed and does not influence conventional devices.If DMX splitters are used and RDM control is to be used, these splitters must support RDM.

RDM controller with TFT touchscreen

  • RDM controller for monitoring and remote control of DMX fixtures compliant with RDM (Remote Device Management)
  • Quick analysis and configuration of fixture parameters, i.e. DMX start address, DMX mode, lamp hour count, fixture status
  • TFT touchscreen for menu settings
  • Various basic DMX control features integrated
  • 1 DMX universe
  • USB port for firmware updates
  • 3-pin XLR connectors
  • Power supply via included PSU
  • DMX output: 1 x 3-pin XLR (F) mounting version
  • Power connection: Mains Input Socket (M) 4-pin screw plug connector (m) mounting version Power supply cord with AC adapter (m) (provided)
  • Made in Europe
Power supply:230 V AC, 50 Hz
via 12 V DC, 1 A power unit included in the delivery
Number of control channels:512
DMX512/RDM connectors:3-pin XLR
USB port:2.0, type B
Dimensions (LxHxD):230 x 133 x 60 mm
Rack installation
Minimum mounting depth:60 mm
Weight:1 kg
Mounting depth min.:ca. 60 mm
Power consumption:12 W
Height:6 cm
DMX output:1 x 3-pin XLR (F) mounting version
Depth:13,3 cm
Power connection:Mains Input Socket (M) 4-pin screw plug connector (m) mounting version Power supply cord with AC adapter (m)
Power supply:110-240 V AC, 50/60 Hz
12 V DC 1 A
DMX input:1 x 3-pin XLR (M) mounting version
Width:23 cm
DMX channels:512
Tömeg1.4200 kg
Méretek0.0750 × 0.3300 × 0.1500 m